Teli CSDS60CM3, Инструкция по эксплуатации

Страница: 8 / 28

D4168926B
Usage Precautions
●
Handle carefully
Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may
cause malfunctions. Further, do not damage connected cables, since this may cause wire breakage.
●
Environmental operating conditions
Do not use the product in locations where the ambient temperature or humidity exceeds the specifications.
Otherwise, image quality may be degraded or internal components may be adversely affected. In
particular, do not use the product in areas exposed to direct sunlight. Moreover, during shooting under
high temperatures, vertical stripes or white spots (noise) may be produced, depending on the subject or
camera conditions (such as increased gain). However, such phenomena are not malfunctions.
●
Restriction for the lens combination
This camera might from a ghost to image area depending on the combination of a lens and an illumination
with this camera. But this is not a failure of this camera. Therefore, Please check the combination of the
lens and the illumination with this camera when you use.
●
Combination check with the monitor
Depending on a used monitor and the combination of the DVI-D cable, there is the case that is not
displayed normally by a monitor. Please confirm the combination of a monitor and DVI-D cable and
this camera beforehand.
●
Precaution in the power supply from camera control connector
There is the case that noise appears depending on a PC. Then please use the DC12V supply from a power
supply connector.
There is a possibility that the camera malfunction according to falling supply voltage depending on a Mini-
USB cable for camera control to use.
In that case, please use the DC12V supply from a power supply connector.
● Do not apply image pickup surface to the direct sun or intense light
The color filter of the sensor fades when I guess strong light right for a long time.
●
Occurrence of moiré
If you shoot thin stripe patterns, moiré patterns (interference fringes) may appear. This is not a
malfunction.
● Occurrence of noise on the screen
If an intense magnetic or electromagnetic field is generated near the camera or connected cables, noise
may be generated on the screen. If this occurs, move the camera or the cable.
●
If the equipment is not to be used for a long duration
Turn off power to the camera for safety and attach the lens cap to the camera to protect the image pickup
surface.