Teli CSDS60CM3, Инструкция по эксплуатации

Страница: 21 / 28

D4168926B 11
［ ［ ［ ［
Internal sync specification
］ ］ ］ ］
(1) Pixel clock rate 108.000MHz±100ppm
(2) Scanning rate
Video out Horizontal Vertical
1280(H)×1024(V) 63.981kHz 59.132Hz
1280(H)× 720(V) 45.918kHz 59.021Hz
［ ［ ［ ［
Electronic shutter specification
］ ］ ］ ］
(1) Shutter system Rolling shutter
(2) Shutter speed ON/OFF change (Fatory setting
：
AUTO)
・
MANU(9 phase) PRESET setting
：
1/60s , 1/100s , 1/120s , 1/250s , 1/500s , 1/1000s ,
1/2000s , 1/4000s , 1/10,000s (Factory setting
：
1/60s)
・
AUTO Corrective range
：
1/60s
～
1/10,000s
Detection are
：
Full screen
［ ［ ［ ［
Camera control
］ ］ ］ ］
Please confirm communication specifications about a control method and the communication specifications.
［ ［ ［ ［
Machine externals specification
］ ］ ］ ］
(1) Dimensions 44mm(W) × 29mm(H) × 77mm(D)
(Protruding portions such as screws and connectors are not included.)
(2) Weight Approx. 100g
(3) lens mount C-mount
A request about the combination of lens
・
Depending on the lens you use, the performance on the camera may not be brought out full
due to the deterioration in resolution and brightness in the peripheral area, occurrence of a
ghost, aberration and others . When you check the combination between the lens and camera,
be sure to use the lens you actually use. As for the C-mount lens used combining this camera,
the projection distance from bottom of the screw should use 9.4 mm or less.
(4) Camera body Conductive between circuit GND and camera body
grounding / Insulation status
9.4mm or less
C-mount lens
Bottom of the screw