Teli CSDS60CM3, Инструкция по эксплуатации

Страница: 17 / 28

D4168926B 7
(7) Electronic shutter
There are 2 modes of MANU(manual) and AUTO. (Factory setting
：
AUTO)
・
MANU mode
It is possible to select the shutter speed with 9 phases.
When you make the speed early, it is possible to take in a lot of light and easy to come to watch a
gloomy subject.
・
AUTO mode
It is always regulated shutter speed to the brightness of the subject.
(8) Mirror mode
It is possible to turn over the output picture.
It is possible to change ON/OFF each Horizontal and Vertical.
(9) Electronic line
Because it is possible to show a monitor screen electronic lines by two vertical and horizontal, it is
convenience to align and measure the images.
You can move the line by one pixel of unit and set the following items.
・
Line type
Fill / Translucent
・
Line width
a pixel / 2 pixels
・
Line color
changeable
・
Setting range
1280(H)× 1024(V) output Vertical
：
0
～
1279
Horizontal
：
0
～
1023
1280(H)× 720(V) output Vertical
：
0
～
1279
Horizontal
：
0
～
719
(10) Color matrix
It is possible to adjust the color masking manually. The adjustment method is changing possibility in RGB
and YUV. (Factory setting
：
RGB)
・
RGB
The variable parameter is R-G, R-B, G-B, G-R, B-R and B-G.
・
YUV
The variable parameter is hue, and saturation(u/v).