Teli CS3940 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 19

Teli CS3940 Скачать руководство пользователя страница 7

Last update: 2002.0806

The specification is subject to change without notice.

6

D4110637B

1. Product Description

Model CS3940 is a B/W CCD camera employing a 3/4 type all-pixel-data-read-out CCD,
featuring ultra-high resolution.

2. Features

(1) Ultra-high Resolution

CS3940 features an ultra-high picture resolution through the adoption of a MEGA-pixel
CCD (Total pixel count: 1,040,000 Active pixel count: 1,000,000 [1,004(H) x 1,004(V)]).

(2) Square-grid Pattern CCD

Pixels in this CCD are aligned in square grid pattern. This makes it easier to perform
computation correctly for image processing use.

(3) Full frame shutter mode

As all pixels’ data are read out even under random trigger shutter mode, images with no
deterioration in vertical resolution are gained.

(4) Random Trigger Shutter Function

      Random trigger shutter, which starts light-exposure in synchronization with external
      trigger signal, is built in. This function enables the camera to capture images at any given
      timing. Shutter speed is selectable among 8 scales, from 1/30s through 1/10000s.

(5) Digital Output

Output signal is digital output complying with TIA/EIA-644 single channel 10 bit.

(6) Partial-scan Mode

This model can readout pixel data in partial-scan format. (Readout area: Screen center 1/3
in 1/60 sec)

3. Configuration

(1)

Camera

body

1

(2) Accessory
Operation Manual

1

4. Optional Accessories

(1) DC IN / SYNC cable (Model name: CPRC3700)

1

(2) Digital video cable

1

«
...
5
6
7
8
9
...
»

Содержание CS3940




















Отзывы:

Нет отзывов