Teli CS3940 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 19

Teli CS3940 Скачать руководство пользователя страница 5

Last update: 2002.0806

The specification is subject to change without notice.

4

D4110637B

CAUTION

Avoid

Do NOT connect/disconnect connectors before turning power off.

Make sure to check the CCU power is OFF before connecting /disconnecting connectors.
Otherwise, you might get an electric shock, your camera might break down.

Avoid

Do NOT give a strong shock/impact against the camera head.

Avoid giving strong shock against the camera head is subjected to strong repetitive
shocks. The camera head has possible to breakdown.

Avoid

Do NOT pull/swing the camera and camera cable forcefully.

Do NOT pull strongly the camera cable/camera-head nor swing it. The stress from pulling
or swinging may cause damage in the coating of the cable, or breaks in the inside wires.

Caution

Do NOT move this device before checking its unplugging to connection cables among the
devices and external cables.

To do so might cause to damages of the connection cables, leading to a fire or electric
accident.

Caution

If the camera is operated in the electromagnetic field, there may be cases where beat noises
(vertical, horizontal, or oblique stripes) may appear in the video output. In that case, take
preventive measures on the electromagnetic-wave generating source so that the camera does
not receive the interference by the electromagnetic wave. Take extra precautions against
electromagnetic-wave-interference if the camera is used with a servomotor, inverter, or other
electromagnetic-wave-generating equipment.

Caution

When the camera is not in use, put a lens or a lens-cap onto the camera head so that the image
pickup plane of CCD is protected from dust, foreign object, or other flaw-causing object. If
the glass plane (image pickup plane) gets dirty, clean it with a cotton swab. When it needs to
be cleaned with a cleaner, be sure NOT to use any organic solvent other than ethyl alcohol.
As a countermeasure against condensation, when the camera is moved from a warm place to
a cold place, take appropriate precautions to prevent condensation from forming on the
camera.

Caution

If any liquid gets into the device, discontinue the use immediately. In the event that water, or
any other type of liquid gets into the body, Do NOT try to continue to use this device.
To do so might lead to a breakdown or an electric hazardous.

Caution

Please use the screw of the camera bottom part when you fix the camera.
Fixing

threads(M3,4units) for camera must be no smaller than 2mm and no

longer than 3.5

«
...
3
4
5
6
7
...
»

Содержание CS3940




















Отзывы:

Нет отзывов