Teli CS3940 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 19

Teli CS3940 Скачать руководство пользователя страница 3

Last update: 2002.0806

The specification is subject to change without notice.

2

D4110637B

●

Handling Precautions

DANGER

Unplug

If any overheating sign is observed, discontinue the use immediately.

In the event that smoke, smell, or any other overheating sign is observed, turn its power switch
OFF immediately and be sure to remove camera cable from camera connector. Do NOT try to
continue to use this device. To do so in spite of clear signs of malfunction invites a fire, an
electric shock hazard, or a serious damage. In such case, contact us or our dealer /distributor
from which you purchased this device for repair service.

Unplug

If any malfunctioning sign is observed, discontinue the use immediately.

Do NOT try to use this device when it is obviously malfunctioning. (Example: No images on
the monitor) In the event of malfunction, turn its power OFF immediately and be sure to
remove camera cable from camera connector. In such case, contact us or our dealer/distributor
from which you purchased this device for repair service.

Unplug

If any liquid gets into the device, discontinue the use immediately.

In the event that water, or any other type of liquid gets into the body, Do NOT try to continue to
use the device. To do so invites a fire or an electric shock hazard. In that case, turn its power
switch OFF immediately, and be sure to remove the camera cable from camera connector. Then
contact us or our dealer/distributor from which you purchased this device for repair
service/technical advice.

Unplug

If any outer strong impact is given to this device, discontinue the use immediately.

In the event this device is dropped onto the ground, or its cabinet is damaged, turn its power

switch OFF immediately, and remove the plug from the outlet. DO NOT try to continue to use
this device. To do so invites a fire or an electric shock hazard. In such case, contact us or our
dealer/distributor from which you purchased this device for repair service.

NEVER

pull apart

Do NOT disassemble this device.

Do NOT attempt to pull apart, repair, or modify the device on your own. To do so might lead to
a fire or an electric shock accident. Contact us or the dealer/distributor from which you
purchased the device for repair/modification.

Avoid

Do NOT supply any power other than specified.

Be sure to use specified power supply. This device is designed to work only under specified
voltage (from DC8V to DC30V). Do NOT attempt to supply the device with power other than
specified. Supplying the device with unspecified power invites a fire or an electric shock
hazard.

Avoid

Do NOT device the device unstably.

Do NOT place the device on an unstable table, sloped ground, etc. Make sure that the device do
not fall nor roll over to prevent an accident.

«
1
2
3
4
5
...
»

Содержание CS3940




















Отзывы:

Нет отзывов