Teli CS3940 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 19

Teli CS3940 Скачать руководство пользователя страница 2

Last update: 2002.0806

The specification is subject to change without notice.

1

D4110637B

BEFORE USE - GENERAL SAFETY INSTRUCTIONS

This instruction manual contains important information for the operator (user) and/or people
around him/her to avoid personal injuries, or property damages against him/her or people
around him/her by using this product correctly.

•

Prior to use, read this operation manual carefully to fully understand its instructions for

correct use.

•

After reading, keep this manual by the side of your equipment for your future reference.

WARNINGS & CAUTIONS

[Definition of markings]
The meaning of each mark used in this instruction manual is given below.

DANGER

This mark warns the user that improper use, indicated with this mark, may
cause death or severe personal injuries against the user or people around
him/her.

CAUTION

This mark warns the user that improper use, indicated with this mark, may
cause personal injuries (*1) or material damages (*2) against the user or
people around him/her.

Notes *1: Personal injuries mean wounds, burns, electric shocks, and others for which the person

injured need not to be hospitalized nor to be cared for the long term.

*2: Material damages mean any direct or consequential damages related to property or

material loss.

This mark indicates what the user

SHOULD NOT DO

. The details of things which the user

should not do are described next to this mark.

This mark indicates what the user

MUST DO

. The details of things which the user must do are

described next to this mark.

This mark indicates that the user must be alert against a possible

DANGER

. The details of the

danger which the user must be aware of are described next to this mark.

This mark indicates that the users are given a

CAUTION

against possible hazards. The details of

the caution which the user must be aware of are described next to this mark.

«
1
2
3
4
...
»

Содержание CS3940




















Отзывы:

Нет отзывов