Telguard TG-PEM, Руководство по установке

Страница: 5 / 24

56051701 – Rev A iv © 2019 Telguard
Table of Contents
Important Note i
Foreword i
Table of Contents iv
General Description and Operation 1
Features 2
Operating Modes 2
Power from Panel 2
Dry Inputs 2
Alarm Format Support 3
Remote Operational Status 4
Programmable Supervisory Trip Output (STC1) Relay 4
Programmable Supervisory Trip Output (STC2) Relay 4
LEDs 4
Getting Ready 5
Pre-Installation Checklist 5
Installation 6
Summary 6
Step 1: Register the TG-7 or TG-7FS Communicator 6
Step 2: Pre-configure the TG-PEM prior to installation 6
Step 3: Mount the TG-7 or TG-7FS Communicator 6
Step 4: Mount the TG-PEM 7
Step 5: Connect the TG-PEM to the TG-7 or TG-7FS Host 8
Step 6: Power Up and Configure 8
Step 7: Connect Zone Inputs (if using) 9
Check Proper Operation of Zones 9
Optional: Connect supervisory trip output 10
Complete the Telguard Power and Expansion Module Installation 10
Appendix 1 – Installing a Second TG-PEM 11
Mounting Bracket 11
Installing Circuit Board 12