56051701
–
Rev A
12
© 2019 Telguard
Installing Circuit Board
Use the three provided TG-PEM mounting screws to secure the second TG-PEM circuit board onto the bracket.
Wiring Connections
Power Connections:
•
Follow instructions to connect first TG-PEM.
•
Connect power and ground from “POWER PASS THRU” terminal of the first TG
-
PEM to the “PANEL
POWER” terminal on the second TG
-PEM.
Data Connections:
•
Follow instructions to connect first TG-PEM.
•
Connect the provided ribbon cable from the keyed connector on the second TG-
PEM labeled “TO HOST”
to the keyed connector on the first TG-
PEM labeled “TO TG
-
PEM”.
See Appendix 2 for wiring diagrams.
