56051701
–
Rev A
10
© 2019 Telguard
Optional: Connect supervisory trip output
The TG-PEM may be configured to control the STC1 relay on the TG-7 series communicator from
. STC1
relay control may be used trigger local annunciation on the FACP for pre-determined input zones.
UL Note for Commercial Fire applications:
STC1 relay must be connected to the panel
’s
input zone to annunciate trouble
condition in TG-PEM and TG-7FS. For commercial burglary applications, any inputs from TG-PEM may be configured to trip
the STC1 relay on the TG-7 to annunciate the alarm or trouble condition locally on the alarm panel using a 24-hour input
on the panel.
Complete the Telguard Power and Expansion Module Installation
•
Route and secure all wires inside TG-7 or TG-7FS enclosure
•
Follow proper guidelines for wire protection
•
Close the enclosure door and lock it
