Telex Communications Forum FOH Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 62

background image

FORUM OPERATION AND MAINTENANCE MANUAL 9601

PAGE 7

WARRANTY

If within a period of twelve months from the date of delivery of the
equipment to the End User it shall prove defective by reason only
of faulty materials and/or workmanship Pbut no faulty design) to
such an extent that the effectiveness and/or the usability thereof is
materially affected, the Equipment or the faulty component shall be
returned to the Distributor or DDA and subject to the following
conditions the Distributor or DDA will repair or at its option
replace the defective components. Any components replaced will
become the property of DDA.

Any Equipment or component returned will be at the risk of the
End User whilst in transit Pboth to and from the Distributor or
DDA) and postage and/or freight charges must be prepaid.

This Warranty shall only be available ifQ-

i)

The Equipment has been properly installed in accordance
with the instructions contained in this manual.

ii)

The End User has notified the Distributor or DDA in writing
within 14 days of the defect appearing.

iii) No persons other than authorised representatives of DDA or

the Distributor have effected any replacement of parts,
maintenance adjustments or repairs to the Equipment.

iv) The End User has used the Equipment for such purposes as

DDA recommends with only such operating supplies as meet
DDAís specifications or approval and otherwise in all
respects in accordance with DDAís recommendations.

Defects arising as a result of the following are not covered by this
Warranty Q -

Faulty or negligent handling, chemical or electro-chemical or
electrical influences, accidental damage, Acts of God, neglect,
defficiency in electrical power, air conditioning or humidity
control.

«
...
5
6
7
8
9
...
»

Содержание Forum FOH































































Отзывы:

Нет отзывов

Похожие инструкции для Forum FOH

Бренд: Sanlida Страницы: 6

Бренд: Boss Страницы: 31

Бренд: ABS Страницы: 21

Бренд: Karel Страницы: 19

Бренд: Dash Страницы: 17

Бренд: ARESA Страницы: 14

Бренд: MQ Multiquip Страницы: 2

Бренд: Hkoenig Страницы: 77

Бренд: Honeywell Страницы: 15

Бренд: Sound Devices Страницы: 60

BLACK LABEL OCTABASS

Бренд: EBS Страницы: 8

Бренд: T-Rex Страницы: 5

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 12

Бренд: Yamaha Страницы: 17

Бренд: Yamaha Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды