Telex Communications Forum FOH Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 62

background image

FORUM OPERATION AND MAINTENANCE MANUAL 9601

PAGE 53

This module was fitted in the FORUM COMPOSER which is no
longer available. This information is included for the sake of
existing owners.

The Composer Output module provides control of the Group output
signal, and monitoring of three tape returns. This provides 24-track
monitoring on the eight group output modules.

On each module, one return is provided with a 2-band EQ section,
and all returns have feeds to Auxiliary buses 1 and 2. All returns
are automatically routed to the stereo mix bus.

TAPE RETURN 3 PTop section of module)

Tape Returns 3 and 2 are indentical in operation. Only Tape Return
3 is described here.

AUX 1
Adjusts the amount of Tape 3 signal fed to Auxiliary bus 1. The
signal is taken pre or post- the level control, depending on the
position of the PRE/POST switch below the AUX 2 control.

AUX 2
Adjusts the amount of Tape 3 signal fed to Auxiliary bus 2. The
signal is taken pre or post- the level control, depending on the
position of the PRE/POST switch below the AUX 2 control.

PRE/POST
Takes the signal feed for the Auxiliary buses from before or after
the return level control.

PAN
Adjusts the position of the Tape Return signal within the main
stereo mix. When the PAN is hard left, full signal is sent to the left
bus, and similarly for hard right. When the pan is in the centre,
equal signal,approximately 4.5dB down, is fed to both left and right
buses.

COMPOSER OUTPUT MODULE

«
...
51
52
53
54
55
...
»

Содержание Forum FOH































































Отзывы:

Нет отзывов

Похожие инструкции для Forum FOH

Бренд: Varimixer Страницы: 32

Бренд: Oster Страницы: 9

Бренд: sescom Страницы: 5

Flashback Mini Delay

Бренд: TC Electronic Страницы: 27

Бренд: Fender Страницы: 8

Бренд: Behringer Страницы: 15

Бренд: IVIE Страницы: 8

Бренд: Honeywell Страницы: 15

Бренд: Taurus Страницы: 2

ALGIMIX 452 045

Бренд: HAGER WERKEN Страницы: 2

DN-X1500S - DJ Mixer

Бренд: Denon Страницы: 2

MSW MSW-ST1800WP

Бренд: Expondo Страницы: 15

Бренд: Shift Line Страницы: 22

Бренд: The Handy Страницы: 25

Бренд: Dateq Страницы: 10

Бренд: Rocktron Страницы: 12

Бренд: A SYSTEMS Страницы: 42

Бренд: Rane Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды