Teleview TAV900A Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 67

Teleview TAV900A Скачать руководство пользователя страница 54

TLV-300E/TAV-900A Professional Digital TV Receiver

User’s Manual

4. HOW TO UPGRADE FIRMWARE

4.1 F

IRMWARE

U

PGRADE

FROM

T

ELEVIEW

W

EB

S

ITE

(TELEVIEW URL)

You could find newer version of firmware at TELEVIEW web site. Therefore, if you have Internet

connection, you could upgrade the firmware from TELEVIEW web site.

Connect an Ethernet cable to the receiver.

Connect the Ethernet cable to internet.

If   the   local   network   has   active   DHCP   server,   the   receiver   will   set   IP  ADDRESS,   NET   MASK   and
GATEWAY IP ADDRESS automatically. Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON.
However   if   the   local   does   not   have   a   DHCP   Server,   enter   the   IP  Address   and   Gateway   address   on
CONFIG/SYSTEM/NETWORK/IP   ADDRESS,   CONFIG/SYSTEM/NETWORK/NET   MASK   and
CONFIG/SYSTEM/NETWORK/GATEWAY menu.

Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TELEVIEW URL MENU.

The receiver will automatically download firmware from TELEVIEW web site(http://www.teleview.com).
When the upgrade is finished, the receiver will ask to reboot it.

The file http://www.teleview.co.kr/download/fw/th3402_v2/th3402_v2_tlv300f_fw, is always recent
firmware of the receiver.

Never turn off the receiver during the flash ROM writing. It will destroy the firmware of

the receiver and the user cannot recover the firmware again. If this situation happens, it will be

necessary to return the receiver to the vendor to repair the flash ROM.

4.2 F

IRMWARE

U

PGRADE

WITH

FTP(TLVFTPD)

Follow this instruction when you could not connect to Public Network.

Connect an Ethernet cable to the receiver.

Connect the Ethernet cable to local network.

If   the   local   network   has   active   DHCP   server,   the   receiver   will   set   IP  ADDRESS,   NET   MASK   and
GATEWAY IP ADDRESS automatically. Please make CONFIG/SYSTEM/NETWORK/DHCP menu ON.
However   if   the   local   does   not   have   a   DHCP   Server,   enter   the   IP  Address   and   Gateway   address   on
CONFIG/SYSTEM/NETWORK/IP   ADDRESS,   CONFIG/SYSTEM/NETWORK/NET   MASK   and
CONFIG/SYSTEM/NETWORK/GATEWAY menu.

Open Command prompt window on the PC connected in common local network, and type “tlvftpd
FW_FILENAME” (tlvftpd is a program that download firmware to receiver available from Teleview on
request).

Select SAVE on CONFIG/SYSTEM/FIRMWARE UPGRADE/TLVFTPD MENU of the receiver.

Version 2.0

54

«
...
52
53
54
55
56
...
»

Содержание TAV900A




































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды