TLV-300E/TAV-900A Professional Digital TV Receiver
User’s Manual
receiver will prompt user to choose one.
Example) No menu state1 (INPUT PORT STATUS), B1:L indicates BNC-1 is in LOCK state.
I
-
N
-
S
1 :
C
B
:
4
B
L
B
B
1
K
O
-
:
C
V
D
L
-
B
3
:
2
:
A
B
B
-
:
5
-
>
< >
R
:
-
2
-
R 1 :
In this upper line of the display, B1:L means BNC input-1 is in LOCK state.
R1:- and R2:- means RF input-1 and RF input-2 is in UNLOCK state and B2:-, B3:-, B4:- and B5:-
means BNC-2, 3, 4, 5 is in UNLOCK state.
In the bottom line of the display, BNC-1:LOCK DVB-ASI means BNC input-1 is locked in DVB-ASI
mode.
Example) No menu state2 (MAIN STATUS) , B1:L indicates BNC-1 is in LOCK state.
]
< 1
B
D
L
D
- A
V
/
K
B -
3
A
O
D
I ]
M
M
[
S
C
I
S
V
H
[
>
S -
>
< >
B
C
N
N
- 1
M A I
:
In this upper line of the display, MAIN:BNC-1 means the main channel is taking input source from
BNC Input-1 and DVB-ASI LOCK means BNC input-1 locked in DVB-ASI mode.
In the bottom line of the display, [DVB-ASI] means BNC input-1 locked in DVB-ASI mode.
[MMS-HD] is an example of program name currently tuned.
<1/3> indicates that current channel contains 3 programs and user can select another program using <>
arrow buttons.
2.7 V
ERIFYING
QAM D
IGITAL
TV S
IGNAL
D
ECODING
THRU
C
ABLE
TV I
NPUT
(O
NLY
IF
YOU
HAVE
D
IGITAL
C
ABLE
RF
INPUT
AVAILABLE
)
Connect your Cable TV source to the unit’s RF input-1 connector.
Use CONFIG/RF-IN1/MODULATION and choose the modulation type. 64-QAM and 256-QAM is
supported.
Use CONFIG/RF-IN1/FREQUENCY PLAN and choose the cable frequency type. Default value is
STANDARD cable but some cable source use HFC cable or IRC cable frequency map.
The symbol rate is selected automatically. Value for 64-QAM is 5.057Msymbols/s, Value for 256QAM is
5.361 Msymbols/s. The desired signal level is -47dBm +/- 15dB.
If you were watching video other than composite video, enter the channel number with numeric button
following ENTER button. The receiver will choose RF-IN1 source for MAIN decoder and tune to the desired
channel. You may also use CONFIG/MAIN/SOURCE to select RF-IN1 and use CONFIG/MAIN/TUNE CH
(tune by channel) as an alternative way.
Version 2.0
24