TLV-300E/TAV-900A Professional Digital TV Receiver
User’s Manual
desired position using Left/Right buttons and set the number using up/down buttons or numeric buttons.
Select SAVE to apply it.
License information may be included as an additional sheet. Be careful not to lose or
mishandle this information.
3.2.8 CONFIG/NETWORK
The NETWORK sub-menu allows you to configure network setting. There are DHCP, IP ADDRESS,
GATEWAY, NETMASK, NMS IP Address and SNMP AGENT sub-menus in NETWORK sub-menu.
Table 21 CONFIG/NETWORK submenu architecture
CONFIG
NETWORK
Ethernet configuration
NETWORK/DHCP
Enable Auto IP configuration
NETWORK/IP ADDRESS
Set the IP address for the receive. Not necessary to configure
when DHCP menu is enabled.
NETWORK/GATE WAY
Set local gateway IP address
NETWORK/NETMASK
Set NetMask. Usually (255.255.0.0) or (255.255.255.0)
NETWORK/NMS IP
ADDRESS
Configure SNMP Manager (Usually PC) IP address
NETWORK/SNMP AGENT
Enable SNMP function
DHCP: For changing a function that automatically gives IP address to on and off. If this is ON, DHCP server
should be working to local that connect to the receiver. If this is OFF, then you should manually setup at the
IP ADDRESS menu.
NMS IP Address: This is the IP address of Network Management System (NMS) system allowed to control
the receiver in remote place.
SNMP AGENT: If this is on ACTIVE, then SNMP Agent will be working so that you can connect the
receiver from NMS System. Otherwise (if this is on INACTIVE), NMS can not connect to the receiver.
Version 2.0
39
