Televic TCS5500, Руководство по установке

Страница: 40 / 125

Page | 32
Introduction to the CPU5500 central unit’s operating
menu
The startup display
After turning on the central unit(which takes about one minute), the
start display appears, showing the TCS5500 Digital Conference &
Interpretation System main menu where you can choose between
five menu choices (when ENTER has been pressed):

Conference: contains the configuration of the microphone
system and the delegate units.

Interpretation: contains the configuration of the interpreter
system and the interpreter booths.

AUX-In/Out: contains the configuration of the auxiliary outputs
and inputs.

System: contains system wide configuration options

Menu Language: contains the language configuration of the
CPU5500 central unit’s menu.
After approximately one minute (this time can be set at 15s, 30s,
60s, 12s and No Return) the menu will jump to the volume setting
of the delegate loudspeaker. This happens because the volume
setting is accessed most frequently when using the TCS5500
Digital Conference & Interpretation System.
The lock functionality
It is possible to lock the menu of the central unit. Suppose that you
configured the central unit to your desires and you do not want
anyone to alter these settings. To do this, you have to lock the main
screen of the central unit. This is the screen where you can see the
volume bar.
Navigate to the main menu of the central unit. The menu can now
be locked by pressing the
F3 and the EXIT button at the same time
and keep them pushed for about two seconds. After you released
the buttons the locking symbol (
) will be displayed in the lower
right corner of the screen of the central unit. When you try to
access the menu of the central unit by pressing the
ENTER button,
nothing will happen. This means that you are successfully locked
out of the menu. However, the volume control of all delegate
loudspeakers can still be controlled by using the jog wheel.
The menu can be unlocked again by the operator whenever he
wants to alter some settings. The sequence to unlock the menu is
the same as the sequence to lock the menu. Press the
F3 and the
EXIT button at the same time again for about two seconds to