Aladdin Digital Infrared Language Distribution
Installation and User Manual
Televic Conference Systems
2011-09-01
21
2.
Digital Infrared
Transmitter
This chapter describes the Aladdin T8 digital
infrared transmitter. It gives an overview of the
transmitter with a front and rear view. It describes
the installation with mounting brackets and gives an
overview of the typical system configurations. The
menu and submenus are given in a tree structure
and there is an explanation on how to use the
menus.
2.1.
Overview
Aladdin T8 can be connected to the Televics
conference central units CPU5500 and Confdea CU
directly or via an AOP5500/9 or AOP2500
respectively. Via these central units it can be
connected to other discussion and voting units or
interpretation desks. It can also be used as a stand-
alone system for distributing external signals.
Aladdin T8 is suitable for either tabletop or 19-inch
rack mounting using. Four feet (for tabletop) and
two brackets (for rack mounting) are supplied.
The following describes the front view of the
AladdinT8 infrared transmitter.
Figure 2.1: Transmitter front view
Figure 2.1:
1.
Power switch with indicator (red)
2.
“MENU” button
a. Under current state, press “MENU”
button to go to main menu;
b. Under main menu, press “MENU” go to
sub menu;
c. Select/Deselect in network configuration.
3.
“
” (Left) button
4.
“
” (Right) button
5.
“Exit” button
6.
Monitor channel select knob
7.
Monitor headphone interface – Ø 3.5 mm jack
for stereo monitor headphone
8.
Monitor volume control knob
9.
Mini IR radiator – 4 IREDs transmitting the
same infrared signal as the radiator output for
monitor purpose.
10.
Display – 256×32 LCD. Display the status of the
transmitter and the menu of system
