37
User manual
STEREO QPSK-PAL CI
ENGLISH
234632
5
1
3
2
4
6
7
4.3.- Amplifier
The amplifier carries out the
amplification of the generated channels
in the QPSK-PAL CI transmodulators,
covering a frequency range of 47 - 862
MHz.
It disposes of two input signal connec-
tors to mix the channels coming from
two systems. If only one of the inputs is
used, it is advisable to load the unused
input with 75 ohm, ref 4061.
The amplifier disposes of an output
connector and a Test socket (-30dB)
located at the top of the front panel.
The amplifier is powered with 15V via a
cable, the same type as that used for
powering the other modules of this sys-
tem.
1.- RF output
2.- Test socket
3.- RF Input
4.- RF Input
5.- Powering input
6.- Attenuator
7.- LED