43
User manual
STEREO QPSK-PAL CI
ENGLISH
e.- Monitor menu 1
This menu shows the following information:
estimation of the BER (bit error rate before
Viterbi), the firmware version of the unit and
the firmware version of the MPEG decoder.
MONITOR >>
CBER: 2.4E-3
V.MPEG:
3.11
f.- Monitor menu 2
This menu indicates current temperature on
a 1-10 scale, as well as the maximum
temperature recorded at any time by the
equipment. By pressing the
key, the
maximum is reset and updated according to
current temperature.
The recommended operation ranges are as
follows:
Optimal function: 0-6
High temperature: 7-8
Excessive temperature: 9-10
In the event that the maximum recorded lies
outside the optimum range, the installation
should be altered to bring down temperatu-
re. Should the STEREO QPSK-PAL CI
modules be in a Ref 5069 cabinet installed
and the working temperature be over the
optimal level, the installation of a ventilation
unit Ref 5334 is strongly recommended. To
check whether this change has been suc-
MONITOR
Act: 04
Max: 06
reset
cessful, you can reset the maximum and
check temperature value after a certain time.