Televes H45 Compact, Руководство пользователя

Страница: 66 / 140

Equipment Config. 66
3.3.2.8.2.- Battery replacement
When the installer wishes to change batteries, it will be necessary to inform the equipment of
the change so that it can adapt the charging and discharging algorithm of the battery to
optimize its autonomy and lifespan.
The following are the steps which must be followed when replacing batteries:
1.- Replace the battery following the instructions in section 5.1. Battery replacement.
2.- Select the function Battery change . A confirmation request for the change will then be
displayed on the screen. To confirm the change, you must press the key , if any
other key is pressed instead of this one, the change will be cancelled.
- Battery change information window -
3.- Turn off the equipment.
4.- Disconnect the equipment from the power grid.
This function must be used only and exclusively when a battery
replacement has been made, since it affects a series of
parameters that are necessary for controlling battery charging and
discharging and if these vary, there will be a negative effect on the
autonomy and lifespan of the battery.