Televes H45 Compact, Руководство пользователя

Страница: 123 / 140

Analyzer 123
NOTE:
RF power/level measured in optical mode may not match the power/level present
at the RF input of the optical transmitter
3.3.5.1- RF/Optical Parameters (599022, 599023, 599024 & 599025)
You can use this option to set the type of input and the related parameters in the meter.
The screen displays four options for selection:
- Input signal: Selects the input type: Optical / RF
- Lambda: When the optical input is activated, it selects the lambda at which the measurement
will be made: 1310nm, 1490nm or 1550nm.
- Optical drives: When the optical input is activated, it selects the type of units used: dBm, mW
/ µW or dB.
- Optical baseline: Displays the optical baseline. To select a new value, use the Set Optical
Baseline option.
- Optical input settings -
3.3.5.2- Set Optical Baseline
This option sets the optical baseline.