Televes FSM 500, Руководство пользователя

Страница: 49 / 104

3.3.2.6.2.- Changing the battery
The FSM 500 offers two possibilities when changing the battery:
A) A possibility is to change the battery for another with a different capacity. The equipment
comes with a Ni-MH 6 AH battery which will provide the equipment with more than 4 hours
of battery life.
When the installer wishes to change the batteries, it is necessary to inform the equipment
so that it can modify the charging and discharging algorithm so as to optimize their lifespan
and duration while in use.
Below is the process that must be followed when substituting the batteries:
1.- Substitute the battery by following the steps described in section 5.1.- Changing
the battery.
2.- Select the Changing the battery function. Select the appropriate option (either
Ni-MH 3,5 AH or Ni-MH 6 AH). A message will appear onscreen asking for
confirmation of the change. To confirm the change, press the button. If any
other button is pressed, the change will be cancelled.
Figure 46.- Information window for changing the battery
Note: This function must only be used when a battery change has really
taken place, as it affects a series of parameters that are necessary for
the control of the charging and usage of the batteries. If these vary,
they will decrease the lifespan and the duration of the batteries. It is
vitally important, in this model, to indicate the type of battery that is
being introduced, as well as to check that it coincides with the
selected type in the side microswitches (37).
3.- Change the position of the battery’s configuration microswitches. At first the
microswitch P5 is above, and P6 below, and it is necessary to change the position
of these microswitches, in other words, P5 should be below and P6 above. Below,
is a diagram on how the microswitches should be placed according to the type of
battery:
Multimetter FSM 500 Ref. 5903
49