Televes FSM 500, Руководство пользователя

Страница: 29 / 104

To configure the equipment according to the stored parameters in a specific menu, simply press
the button (or go to the CONF. MEASURE => MEMORIES LOGGER => MEMORIES
menu), select the desired memory from the list and press .
If there isn't any memory in the meter, the message " NO MEMORIES " will appear onscreen.
By default, the meter has two memories called INTEG0 (C/N Auto, Analogue TV mode, 7,5 Mhz,
6.0 Mhz Bandwidth) INTEG2 (C/N Auto, Analogue TV mode, 22.65 Mhz, 1.5 Mhz Bandwidth).
These two memories should be used together with the return channel simulator, ref. 7637, in
position 0 and 2. The equipment also includes the channels plan of this simulator.
These memories enable the analysis of the Return Channel, and have been especially designed
for Televés Integra installations. Both configurations will be treated similarly to the memories
defined by the user, and because of this, they can be edited or eliminated.
3.3.1.4.1.1.- Save
To save a specific memory, place the meter in the desired configuration and press . Use
the button to select the MEMORIES function. The menu from the previous figure will
appear. Now press the SAVE button. The list of memories will be located at the end of this list
and the name of the following free memory will flash on and off.
By default, the name of the memory that appears is always Mem followed by two digits
ordered according to their values, but the user can name each memory as desired.
There are four options:
1.- Press to accept the name that appears by default .
2.- If we want to change the digits only, we simply need to press the desired numbers on
the number pad.
3.- If we want to write over a memory in the list, we need to use the rotating knob to reach
the memory. Once here, we should press .
4.- If we want to change the name of the memory, press the EDIT button.
Multimetter FSM 500 Ref. 5903
29