Televes FSM 500 Скачать руководство пользователя страница 40

Страница: 40 / 104

3.3.1.4.3.2.- Edit LOGS

This option lets us change the name of the desired LOG at any time. To do so, use the rotating

knob to select the LOG, confirm your selection by pressing the

key. The name of this LOG

will flash on and off and using the rotating knob and

button, we can change the characters.

3.3.1.4.4.- Graphs (OPTION 1)

Function dealing with the graphs in the meter. This function will be available when the meter is
in analyser mode as long as the user disposes of OPTION 1. If you try to access this function
in another mode, the message "ONLY SPECTRUM" will appear.

The meter lets you register up to

100 simple graphs

50 graphs

with maximums.

If the maximum function is enabled, both lines will be saved.

Figura 32.-

GLOGs list

In this case of not having any graph saved, the meter will display the onscreen message "NO
GRAPHS".

In order to see the graphs we will use the rotating knob through the GLOGs list and once we

have found the desired one, we should pres

and the list of graphs that it contains will

appear. We can select the graph and press

to retrieve it.

Multimetter FSM 500

Ref. 5903

Содержание FSM 500









































































































Результаты поиска

Содержание FSM 500

Отзывы:

Похожие инструкции для FSM 500

Бренды по названию

Популярные бренды

Televes FSM 500, Руководство пользователя

Результаты поиска

Содержание FSM 500

Отзывы:

Похожие инструкции для FSM 500

Бренды по названию

Популярные бренды