Teletek electronics TP2000, Инструкция по установке и эксплуатации

Страница: 6 / 36

6 TP2000 Transmitter
-
Installation and Operation Manual
1. 3 added Functions in the software revision 7.X of TP2000 Transmitter
In the Software Revision 7.X of TP2000 Transmitter are added the following functions:
1. Serial connection with CA60Plus alarm system for transmitting of zone
information.
2. Time delay in transmitting an event for mains power supply lost.
3. A possibility for directing of input events independently to both frequencies.
4. RNA algorithm for signal transmitting at presence of non-inverted restore
input.
The added functions cause a change of the TP2000 transmitter parameters programming
software - TP2000 integrator . The button advanced Properties is moved in the screen
inputs , see page 13. The other changes in the TP2000 integrator software are explained
together with the added functions of the TP2000 Transmitter.
2. introduction to TP2000 integrator
TP2000 integrator is a ancillary program that is part of the transmitter programming
suite for the TP2000, TP2001 and TP2000 V.6.X / V.7.x transmitters.
Start the program by double-clicking the left button of the mouse on its icon.
Figure 2. TP2000 integrator starting screen
The menu of the program holds a File and Help options.
The drop-down File accesses the following commands:
• new - create a new file;
• Open Default - open an existing file with transmitter settings;
• exit - closes the application.
The Help opens a file with help topics.