TELETECH TX 916, Руководство оператора

Страница: 5 / 16

pg. 5
2. SAFETY INFORMATION
To avoid injury read “Safety Information” and
“Warnings and Precautions” before using this
instrument
Safe Working Practices
Review the safety information and adhere to the safe working
practices described in this manual and elsewhere.
Protection may be impaired if the instruments are used for purposes
other than described in this manual.
The symbols used on the instrument and in this manual are
:
Safety Information Warning,
Refer to Manual
Conforms to European Union
Directives
Do not dispose of in general
domestic waste. Refer to local
authorities for direction.
Warnings and Precautions
To
avoid possible electric shock or personal injury, and to avoid
possible damage to the instrument or to the equipment under test,
adhere to the following practices:
This equipment is to be used by trained technicians only. Use
caution when using this equipment. Voltages in excess of 30Vac,
42Vpeak or 60Vdc may be present on lines being tested. These
voltages pose a potential shock hazard.
Before using the equipment inspect the case. Do not use the
equipment if it is damaged. Look for cracks in the case or missing
parts. Pay particular attention to the insulation around the
connectors.
Inspect the test leads for damaged insulation or exposed metal.
Check the test leads for continuity. Replace damaged test leads
before using the equipment.
Do not use the equipment if it operates abnormally. Protection
may be impaired. When in doubt have the equipment serviced.
Do not apply more than the rated voltages to the equipment.
Use the correct connections and functions for your measurements.