TELETECH TX 916, Руководство оператора

Страница: 6 / 16

pg. 6
Take extra care when Insulation Resistance is being measured.
There may be voltage applied to the line as high as 500 Vdc.
Ensure you warn others when insulation Resistance is measured.
Ensure that equipment is removed from the line and the test leads
are disconnected before opening the case. Do not operate the
equipment with the case open.
Use only 9V alkaline batteries. Ensure the battery is installed
correctly.
Replace the battery as soon as BATTERY FLAT is indicated.
Remove the batteries if they are worn out or before storing your
device; they can become hot and cause burns.
Always remove old, weak or worn-out batteries promptly and
recycle or dispose of them in accordance with Local and National
Disposal Regulations.
If a battery leaks, remove it, taking care to keep the leaked fluid
from touching the skin or clothes. If fluid from the battery comes
into contact with skin or clothes, flush skin with water
immediately. Before inserting new batteries, thoroughly clean the
battery compartment with a damp paper towel or follow the battery
manufacturer’s recommendations for clean-up.
Breaking electrical connections may generate sparks. This
instrument is not to be used in areas in which flammable gases
exist, or may exist.
Disconnect earphones before connecting probe test leads to the
line.
TX916 is suitable for telecommunications lines and is not rated for
Mains use (>220Vac).
This equipment must not be connected to mains supply circuits.
Do not apply more than the rated voltages to the equipment.
When connecting the test clips be sure to keep your fingers away
from potentially live metal parts.
Disconnect test leads before opening battery compartment. Do not
operate the equipment with the battery cover removed.
Clean only with a damp cloth and detergent. Do not immerse in
water.
To protect from electrical shock, only use the test leads provided.
Do not use this device during electrical storms.