Telestream Wirecast Gear 110, Руководство пользователя

Страница: 30 / 48

Using WC Gear
Configuring the I/O Ports
30
But they are also displayed as selections in Capture Devices of the Shot Selection menu:
The physical SDI connectors are identified by “ SDI 1 ”, etc. (See “Model 230 Rear Panel”
on Rear Panel Differences for details).
Reference Input
The Reference Adjustment enables you to set the timing of the video outputs relative
to the reference input signal. This is often used when the video output needs to be
synced up with other video outputs. The reference adjustment can be accurately timed
down to the sample level.
To adjust the reference input, move the offset slider to time the video output relative to
the reference input. The Reference input slider is located at the bottom of the Video
Output tab at the in the Connector Setup window.
This adjustment makes it possible to switch between devices on a downstream router
(or production switcher), by eliminating any “glitching” when switching is performed.
Logical input
numbers
Adjust slider