Telestream Wirecast Gear 110, Руководство пользователя

Страница: 19 / 48

19
Installation of
WC Gear
Introduction
This section shows you how to install WC Gear. This includes physical mounting and
wireless connections.
Note: Before installing WC Gear, read through the section on WC Gear Panels .
Topics
 Physical Mounting
 Wireless Connections
Physical Mounting
Wirecast Gear comes configured for table-top use with the included feet pre-attached.
The unique size and shape of Wirecast Gear is designed to occupy a minimum of space
while making connectors and cables easily accessible.
Also included with all Gear systems are two rack-mount "ears" and screws that allow the
system to fit into a standard 19-inch rack and take up 1.3 RU (Rack Units). This
configuration is useful for in-place racks and mobile flypacks where convenient and
safe transport of your live production system is required.
Note: The rack-mount configuration will require removal of rubber feet remove the
vent warning label on top of the unit, if desired. It is there to remind you to never block
the top of chassis air vents.
Wireless Connections
To make connections to your Wirecast Gear system, refer to WC Gear Panels for
connector functions and locations, and then follow these steps.