Teleste CFO series Скачать руководство пользователя страница 8

Copyright acknowledgements

Information in this document is subject to change without notice and does not 
represent a commitment on the part of Teleste Corporation. 

Copyright © Teleste Corporation. All Rights Reserved

No part of this document may be reproduced, transmitted, stored in a 
retrieval system, or translated into any other language without the express 
permission of Teleste Corporation.
 
Teleste Corporation
Video Networks
P.O. Box 323
FIN-20101 Turku
FINLAND
www.teleste.com

WEEE directive

Directive 2002/96/EC of the European Parliament and of the Council on waste 
electrical and electronic equipment (WEEE) obliges that producers appropriately 
mark electrical and electronic equipment with the symbol indicating separate 
collection. This obligation applies to the equipment put on the market in EU after 
13 August 2005.  

Teleste devices which belong to the scope of the directive have been marked 
with the separate collection symbol shown below. The marking is according to 
the standard EN 50419. The symbol indicates that the device has to be collected 
and treated separately from unsorted municipal waste. 

User manual revision history note:

The latest version is always available in pdf-format on our web site:

www.teleste.com

Содержание CFO series









Отзывы: