TELES iGATE FCT User’s Guide
27
Previous Page
Table of Contents
Next Page
Specifications
* Specifications are subject to change without notice
General Specifications
Mains Supply Voltage
100-240 VAC, 50-60 Hz
Current Consumption
0.5 A max
Operating temperature
0 °C to 45 °C
Physical dimensions
1U 19" shelf
Standards
Full CE
Line Specifications (for each of the channels)
Line loop current
40 mA max
Line supply voltage
- 48 VDC ± 10%
Line impedance
600 Ohm
Dial tone
400 Hz ± 1%
Ring generator
42 Vrms/25 Hz
Line signaling
DTMF
Line connector (2W
TIP/RING)
RJ11-C (pin 2, 3- TIP, pin 4, 5- RING)
Data Port Specifications
Interface port
RS232
Protocol
AT Command Compatible
GSM Channel Specifications
Dual band GSM
900/1800Mhz or 850/1900MHz
Standards
Type Approval CE mark.
GSM module
WaveCOM Wismo 2D
Optional Features
Fax
Requires a data connection between the
iGATE FCT
and a PC with Winfax
version 10 and up.
SMS
Requires a data connection between the
iGATE FCT
and a PC running an
SMS application that supports Wave-
COM module.
Safety Standards
N°QUAEMC_EN. 15967C
Conforms to the EMC requirements of:
EN 301 489-1 V1.4.1: 2002; EN 301
489-7 V1 .2.1: 2002, R&TTE Directive
1999/5/EC and EMC Directive 89/336/
EEC Article 4.
N°QUAS AF_EN. 15967C
Conforms to the Safety requirements of:
EN/IEC 60950-1:200 1and AS/NZ
60950.1:2003