TELES iGATE FCT User’s Guide
14
Previous Page
Table of Contents
Next Page
To enable Call Duration Limit:
1. Dial ** 1343**#. The unit enters the programming
mode and emits the confirmation tone.
2. Dial *6133*#. The unit emits the confirmation tone.
3. Dial the maximum allowed time—between 1 and 254
minutes. A number between 254 and 999 will be
accepted as 254. A number over 999 will be rejected.
To disable this feature, dial *6133*#0#.
Calling Line Identification Restriction (CLIR)
This parameter determines whether or not the iGATE FCT
sends its SIM number to the called party.
1. Dial ** 1343**#. The unit enters the programming
mode and emits the confirmation tone.
2. Dial either:
•
*8200*#. This allows the presentation of the SIM
number to the called party.
•
*8201*#. This hides the SIM number from the
called party.
The unit emits the confirmation tone.
Clearing a Lock
Lock occurs after an unsuccessful attempt to change the
PIN code. The unit will not perform any command rele-
vant to a PIN code change until the Lock is cleared.
To clear the lock:
1. Dial ** 1343**#. The unit enters the programming
mode and emits the confirmation tone.
2. Dial *6122*#. The unit emits the confirmation tone
and clears the lock.
Alternately, clear the lock by inserting a SIM card that
does not request a PIN code. The unit notes that the SIM
card does not require a PIN code and, consequently,
clears the lock.
WARNING!
SIM cards lock after 3 failed tries. If using the
alternate method to clear the lock, do not reinsert the first SIM card.
Once the SIM card locks, it can only be unlocked with the PUK
number.
Erase SMS Inbox of the SIM card
Use this command to erase all messages stored in the
SMS inbox of the SIM.
This feature is important when using SMS commands to
remotely control the unit. The inbox of the SIM usually
