Telereef TR1D Скачать руководство пользователя страница 27

Страница: 27 / 28

Telereef Controller - User Manual V.140313

• pH Sensor settings

Raise pH Upper

- The upper pH value of the raise pH

equipment. pH level raise above this value will switch off related
relay/socket.

Raise pH Lower

- The lower pH value of the raise pH

equipment. pH level raise above this value will switch off related

relay/socket.

Raise pH Socket

- Relay/Socket of raise pH equipment bound

to this sensor.

Lower pH Upper

- The upper pH value of the lower pH

equipment. pH level raise above this value will switch on related

relay/socket.

Lower pH Lower

- The lower pH value of the lower pH

equipment. pH level below this value will switch off related

relay/socket.

Lower pH Socket

- Relay/Socket of lower pH equipment bound to this sensor.

Alert Upper

- pH Value above this value will active beep alert or push notification.

Alert Lower

- pH Value below this value will active beep alert or push notification.

Beep Alert

- Enable / Disable beep alert.

Push Notification

- Enable / Disable push notification to Smart Phone.

• Wireless Dosing Pump Pair Screen

- The RF Power Amp setting of the WDP. 1=Lowest,

4=Maximum. Default is 3.

Device ID/Version

- The Device ID and the firmware version of

the paired WDP.

Pair/Unpair Button

- Button used to pair or unpaid a WDP.

D. Passcode - The four characters passcode. WDP should

matched the passcode in order to receive a command from
Telereef Controller.

E. Address - The wireless RF starting address which will be used

on WDP. Range from 1 to 200, each WDP unit occupied two
addresses.

F. Channel - The wireless RF starting channel which will be used

on WDP. Range from 1 to 99, each WDP unit occupied one
channel.

• Wireless Dosing Pump Setting Screen

Name

- Name of the additive connected to the dosing pump. If the name is blank or

first character of the name is a space, this pump will not be show on Home page.

Speed

- Speed of the dosing pump, value from 1 to 255, default speed is 120.

ml/m

- The amount of additive output after one minute running time of the dosing

pump. Please update this value after calibrated the dosing pump.

Содержание TR1D





























Результаты поиска

Содержание TR1D

Отзывы:

Бренды по названию

Популярные бренды

Telereef TR1D, Руководство пользователя

Результаты поиска

Содержание TR1D

Отзывы:

Бренды по названию

Популярные бренды