blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 42 von 71
blue_PiraT2_UserManual_V2.4.1.doc
If the connection is getting lost, it will take about 5 seconds to build up a new connection for
logging data again.
10.5.5
TCPServer
The blue PiraT2 can be configured as a TCP server by setting up an IP address and port num-
ber.
There is an adjustable timeout. The connection will be terminated if no data arrives. This ap-
pears as a message in the trace file. There is no configurable debug level. The blue PiraT2 as a
TCP server accepts TCP data packets, TCP multicast and TCP broadcast packets.
If the connection is getting lost, it will take about 5 seconds to build up a new connection for
logging data again.
10.5.6
SpyMode
By using the Ethernet Spy mode it is possible to log all Ethernet data (promiscuous mode).
More information can be found in the
Telemotive System Client User Guide
.
10.5.7
EsoTrace
By using the EsoTrace mode it is possible to log data in the EsoTrace protocol.
More information can be found in the
Telemotive System Client User Guide
.
10.5.8
Camera (license required)
If you use a camera license on the data logger, it is possible to connect up to four Ethernet
webcams to the blue PiraT2. After connecting the blue PiraT2 is able to log MPEG4 video
streams.
More information can be found in the
Camera User Guide
.
10.5.9
DLT (license required)
If you use a DLT license on the data logger, it is possible to connect up to 16 ECU for logging
their DLT messages.
More information can be found in the
DLT-logging User Guide
.
