Telemotive blue PiraT2/5E, Руководство пользователя

Страница: 16 / 71

blue PiraT2 / 5E / 5E
User Guide
Datum: 21.09.2016
Seite 16 von 71
blue_PiraT2_UserManual_V2.4.1.doc
6.6.1 Startup
During the Startup phase the display shows:
blue PiraT2
After the Startup phase is finished, the display shows the status of the most important interfac-
es. For a MOST25 version the MOST25 and FlexRay will be displayed on the beginning:
M25-
FR NN--
By rotating the [menu] knob you can navigate through the entire interfaces. On the following
table you can find the abbreviation for the displayed interfaces and the possible status infor-
mation.
Abbr. Interface - =
Off X =
Not con-nected N =
No Traffic T =
Traffic E =
Error S =
Switch mode
CAN CAN x x x x
CCP/XCP CCP/XCP x x x x x
ETH Ethernet x x x x x
FR FlexRay x x x
LIN LIN x x x
M25 MOST25 x x x x
M150 MOST150 x x x x
VID Video x x x
SER Serial x x x
Table 6.2: Interface abbreviations and status information
6.6.2 Menu mode
By pushing the [menu] knob you can enter the menu mode and you can see the following two
lines.
– – – Menü – – –
[1] Info
Currently the menu has five main categories:
1. Info
2. Licenses
3. Functions
4. Error Memory
5. Memory Device
The currently selected category is displayed inverted. By pushing the
[menu] knob you can go
into the selected main category.
[1] Info 1/12
Firmware: 02.02.01
Usually in the first line, the main category number and the name will be displayed on the left
side. If one line has not enough space to display the name and the value, the first line will be
used for the name and the second for the value.
On the right side the sub category number and the total numbers of sub categories will be dis-
played (see above).