8
7.0 DIP Switch Settings
The DIP switch settings on the 50516 PC Board may be changed to set
communication baud rate and to change the polarity of zoom and focus pots and
joysticks. (Important: Unit must be turned off and on after changing settings.)
Figure 7 shows the switch settings for different baud rates and certain lenses.
Consult the factory for lenses other than those shown in Figure 7. (Note: All
lenses come modified from the factory. If a lens requires field modification,
consult the factory for instructions.)
Figure 7 DIP Switch Settings for Lens Function and Baud Rate
#50887
#50516
DIP Switch
Power
Supply
Power
Supply
Power
Supply
#68004
DIP Switch Assignments
1- 3
Set Communication Baud Rate (see chart below)
4
Test Routine (must be left on at all times)
5
Reverses Zoom Pot polarity
6
Reverses Focus Pot polarity
7
Reverses Zoom Joystick direction
8
Reverses Focus Joystick direction
38,400
1
1
1
19,200
0
1
1
9600
1
0
1
4800
0
0
1
2400
1
1
0
1200
0
1
0
600
1
0
0
Baud Rate
Sw #1
Sw #2
Sw #3
Important:
Unit power must be turned off and on after changing DIP switch settings.
1
O
N
O
F
F
5
2
6
3
7
4
8
DIP Switch Settings for:
Canon KTS-A Lens
Fujinon BMD Lens w/PC Bd # 110B7985601
(Identified by zoom/focus and Iris auto/man
switches on front of servo box.)
1
O
N
O
F
F
5
2
6
3
7
4
8
DIP Switch Settings for:
Canon REA-1A PZP Lens
KOWA LMZ*** AMP-R Lens
II
Note:
Consult factory for additional lenses.
1
O
N
O
F
F
5
2
6
3
7
4
8
DIP Switch Settings for:
Canon KTS Lens
Canon KTS-B Lens
Fujinon BMD Lens
(all but those indicated below)
