4
www.telematrix.net
TRIMLINE SERIES USER GUIDE
Installation
CAUTION INFORMATION
• Never install telephone or network wiring
during a lightning storm.
• Never install telephone or Ethernet jacks in
wet locations unless the jack is specifically
designed for wet locations.
• Never touch uninstalled telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying
telephone and network lines.
CONNECTING THE HANDSET CORD
Plug one end of the modular coiled handset cord
into the receptacle located on the left side of
the base unit. Plug the remaining end into the
receptacle on the handset.
CONNECTING THE LINE CORD
Plug one end of the 12-foot modular telephone
line cord into the receptacle on the bottom of the
base unit. Route the cord through the cord channel
provided. Plug the remaining end of the line cord
into a standard telephone outlet.
HANDSET RETAINING CLIP
The handset retaining clip must be activated to hold
the handset when wall mounting the telephone. To
activate, remove the clip, rotate it 180° and snap it
back into place.
WALL MOUNTING
The TeleMatrix Trimline telephone can be wall
mounted to a standard telephone wall jack plate.
Using the 3-inch line cord, plug one end into
the receptacle on the bottom of the base unit.
The remaining end will plug into the wall jack.
Carefully align the slots on the bottom of the base
unit with the wall mount studs on the jack plate.
Parts List
The following parts are included in this package:
• 12-foot modular telephone line cord
• 3-inch modular telephone line cord.
• 10-foot modular coiled handset cord.
• Base unit
• Handset
Care and Maintenance
•
Keep the telephone dry. If it gets wet, wipe it
dry immediately. Liquids might contain minerals
that can corrode the electronic circuits.
•
Use and store the telephone in a normal
temperature environment. Temperature
extremes can shorten the life of electronic
devices and distort or melt parts.
•
Keep the telephone away from excessive dust
and dirt that can cause premature wear of parts.
•
Wipe the telephone with a damp cloth
occasionally to keep it looking new. Do not use
harsh chemicals, cleaning solvents, or strong
detergents to clean the system.
Features
• Single line operation
• Tone/Pulse dialing (selectable)
• Message waiting lamp (90VDC Neon)
• Convenient data port
• Handset volume control
• Flash function (600mS)
• Dial in handset
• Last number redial
• Hi/Low ringer volume control
• Desk or wall mountable
• Secured, permanent mounting option
• Fully modular
• Hearing aid compatible
Содержание 1L Trimline
Страница 1: ...TRIMLINE SERIES USER GUIDE 1L Trimline...
