Telemark TT-10, Инструкция по эксплуатации

Страница: 31 / 38

With the MODE switch in the TRIANGLE setting, the Lateral and Longitudinal
Amplitudes and Frequencies of the beam are set with the corresponding knobs.
The Joystick is used to position the beam. The resulting beam movement is in a
diamond(s) pattern.
2
JOYSTICK - Moves the beam position (in two axis —Lateral [left
& right] and Longitudinal [near & far]), or the center position of
patterns.
3
& 4
AMPLITUDE - Adjusts the overall pattern size (in two
axis).
5
& 6
FREQUENCY - Adjusts the sweeping speed(s). When in
Triangle mode, the Lateral and Longitudinal Frequency knobs
operate independently (in two axis). When in Spiral mode, only
the Longitudinal/Mod.Freq. pot (6) controls the spiral-collapse
frequency.
7
MOD AMP - The modulation amplifier knob adjusts the depth of
the spiral’s collapse.
Standard Sweep Select Module (Memory Module)
See figure 4-E
The Removable Module may be used plugged into the chassis, or as a Handheld
Remote on an extension cable. Each Channel (1—4) operates similarly to the
Controller (Joystick) Module.
CONTROLS AND INDICATORS
4-7
Telemark TT-10/15 Power Supplies
Figure 4-D
Sweep
Module, Front
View