Telemark CHEETAH TT-10 CE 208 VAC, Инструкция по эксплуатации

Страница: 19 / 39

Telemark TT Cheetah Series Power Supply Instruction Manual
19
5 HV ON Indicator Output
(O.C.)*
0 to +Vcc Low = HV is on
High = HV is off
6 Source ON Indicator Output
(O.C.)*
0 to +Vcc Low = Source is on
High = Source is off
7 Voltage Reference
Select Input Jumper only,
do not apply
voltage
Open = always front panel pot
GND = kV reference selected by
Control Select switch
8 Digital GND
(GND)
Power Reference for pins 1, 7, 12, 14,
15, 30, 32, 33, 34
9 HV ON Control Input 0 to +24VDC +5VDC to +24VDC = HV ON
0VDC = HV OFF
10 Source ON Control Input 0 to +24VDC +5VDC to +24VDC = Source ON
0VDC = Source OFF
11 Unused
12 F.P. ON in Remote Input Jumper only,
do not apply
voltage
Open = ON signals from PLC
GND = F.P. ON switches are
active in remote mode
13 Digital GND
(GND)
Power Reference for pins 1, 7, 12, 14,
15, 30, 32, 33, 34
14 Remote Voltage
Reference
Input 0 to +10VDC 0 to +10VDC = 0 to -10kV
0 to +8VDC = 0 to -8kV (TT-6)
0 to +7VDC = 0 to -7kV (TT-3)
15 Remote Emission
Current Reference
Input 0 to +10VDC 0 to +10VDC = 0 to 100% current
(500 / 750 / 800 / 1000 / 1500 / 1700 mA)
16 Isolated GND
(GND_ISO)
Power Reference for pins 2 thru 6, 9,
10, 24, 31 (isolated from GND)
17 Isolated GND
(GND_ISO)
Power Reference for pins 2 thru 6, 9,
10, 24, 31 (isolated from GND)
18 Digital GND
(GND)
Power Reference for pins 1, 7, 12, 14,
15, 30, 32, 33, 34
19 Digital GND
(GND)
Power Reference for pins 1, 7, 12, 14,
15, 30, 32, 33, 34
J5
–
REMOTE USER I/O (continued)
Pin# Name Input/
Output/
Power Signal
Range Function Description