Telemark CHEETAH TT-10 CE 208 VAC, Инструкция по эксплуатации, Страница: 30 / 39

Telemark TT Cheetah Series Power Supply Instruction Manual
30
12 F.P. ON in Remote Input Jumper only,
do not apply
voltage
Open = ON signals from PLC
GND = F.P. ON switches are
active in remote mode
13 Digital GND (GND) Power See pin 8
15 Remote Emission
Current Reference
Input 0 to +10VDC 0 to +10VDC = 0 to 100% current
(500 / 750 / 800 / 1000 / 1500 / 1700 mA)
16 Isolated GND
(GND_ISO)
Power Reference for pins 6, 10, 24, 31
(isolated from GND)
17 Isolated GND Power See pin 16
18 Digital GND (GND) Power See pin 8
19 Digital GND (GND) Power See pin 8
24 All Interlocks OK
Indicator
Output
(O.C.)*
0 to +Vcc Low = All Interlocks satisfied
High = Not all Interlocks satisfied
26 Source Ready/OFF
Indicator
Output
(O.C.)*
0 to +Vcc Low = Source is ready/off
High = Source is not off
29 User +10VDC
(Emission)
Power +10VDC Source (if used) for remote
Emission reference input
(2mA maximum output)
31 +Vcc Input
+5 to
+24VDC
External user isolated digital
control power (clamping)
33 Emission Current
Monitor
Output 0 to +10VDC 0 to +10VDC = 0 to 100% current
(500 / 750 / 800 / 1000 / 1500 / 1700 mA)
34 Filament Current
Monitor
Output 0 to +10VDC 0 to +5VDC = 0 to 50A
35 Isolated GND Power See pin 16
36 Digital GND (GND) Power See pin 8
37 Digital GND (GND) Power See pin 8
See Notes on page 19