Telemark CHEETAH TT-10 CE 208 VAC, Инструкция по эксплуатации, Страница: 21 / 39

Telemark TT Cheetah Series Power Supply Instruction Manual
21
Note 2: If using “User +24VDC” as control supply for pins 2
-6, 9 and 10, then GND and
GND_ISO must be shorted externally (e.g. pins 17 and 18 or
35 and 36)
J6
–
HANDHELD (26pin HD Sub-D M)
For Handheld Remote Controller (Pendant, optionally available)
J7
–
INTERLOCKS
–
External Safety Interlocks (15pin Sub-D M)
Pin
#
Name Input/
Output/
Power Signal Range Function Description
1 VAC Interlock Input Contact only Return for pin 2, GND
2 VAC Interlock Input Contact only Contact closure to pin 1, +15VDC
3 TANK Interlock Input Contact only Return for pin 4, GND
4 TANK Interlock Input Contact only Contact closure to pin 3, +15VDC
5 AUX1 Interlock Input Contact only Return for pin 6, GND
6 AUX1 Interlock Input Contact only Contact closure to pin 5, +15VDC
7 HVAC Interlock Input Contact only Return for pin 8, GND
8 HVAC Interlock Input Contact only Contact closure to pin 7, +15VDC
9 H20 Interlock Input Contact only Return for pin 10, GND
10 H20 Interlock Input Contact only Contact closure to pin 9, +15VDC
11 AUX2 Interlock Input Contact only Return for pin 12, GND
12 AUX2 Interlock Input Contact only Contact closure to pin 11, +15VDC
13 Digital GND Power GND
14 Digital GND Power GND
15 Digital GND Power GND, Cable shield
Note: In case that interlock inputs need to be paralleled (e.g. only one safety switch is
available for two interlock inputs) it must be made sure that the Contact closure pins
(+15VDC) are wired together and the Return pins (GND) are wired together (or only one