Telegesis
TG-EAPE-PM-006-102 14
EAP-E
Product Manual
1.02
7 Ordering
Information
Table 3. Ordering Information
Ordering/Product Code
Description
EAP-E
Access Point based on standard ETRX2
•
AT Style Command Interpreter
•
Integrated 2.4GHz Antenna
EAP-E-PA
Access Point based on ETRX2-PA
•
AT Style Command Interpreter
•
Integrated 2.4GHz Antenna
ETRX2DVKA
Development Kit with:
•
1 x ETRX2HW Module with Board to Board Connector
•
1 x ETRX2DV Development Board
•
2 x ETRX2 Modules soldered to
•
2 x ETRX2MCB Module Carrier Boards
•
2 x AA Battery Holders with Leads & Connector Plugs
•
1 x USB Cable
ETRX2DVKA-Plus
Telegesis Development Kit with:
•
1 x ETRX2DV Development Board
•
1 x ETRX2HW Module with a fitted Harwin
•
1 x ETRX2MCB Carrier Boards fitted with ETRX2 modules
•
1 x ETRX2-PA MCB with ETRX2-PA Module
•
1 x AA Battery Holders with leads
•
1 x USB cable
•
1 x ETRX2USB USB stick
•
1 x ETRX2HRHW-PA Module with Hirose connector for
external antenna and Harwin
•
1 x ½ Wave antenna
•
1 x 100mm cable to connect module to antenna
ETRX2
Telegesis Wireless Mesh Networking Module with Ember
ZigBee® Technology:
•
Telegesis AT Style Command Interpreter and
•
Ember’s
EmberZNet2.x
stack
•
Integrated 2.4GHz Antenna
Notes:
•
Customers’ PO’s must state the Ordering/Product Code.
•
There is no “blank” version of the ETRX2 Module available. All Modules carry both the
EmberNet Stack and the Telegesis AT style Command Layer. Where customers wish to
program custom firmware they can simply overwrite the existing firmware
•
Please contact Telegesis if you require additional AT style commands or specific integration
assistance.
©2008 Telegesis (UK) Ltd
EAP-E Product Manual (Rev 1.02)
