Telegärtner DoorLine Slim DECT, Инструкция по эксплуатации и сборке

Страница: 40 / 56

6
Configuration of SwitchBox
40 / 56 DoorLine Slim DECT
4. Enter the previous PIN Code (factory setting "0000")
5. Actuate the hashtag button on the telephone
You will hear the neutral acknowledgement tone
6. Enter the new PIN Code ("0000" will not be accepted)
7. Actuate the hashtag button on the telephone
You will hear the neutral acknowledgement tone
8. Enter the new PIN Code
9. Actuate the hashtag button on the telephone
If the new PIN Code was saved in the SwitchBox, you will
hear the positive acknowledgement tone. This can take a
few seconds
or
If an error occurred, you will hear the negative acknow-
ledgement tone (8 short beeps). After the third unsuccess-
ful attempt, the connection is disconnected. The proced-
ure must be repeated starting at point 1
A PIN Code for the SwitchBox can only be entered if the SwitchBox was
previously registered (see Registering SwitchBox [
}
39]).
6.3 Configuring SwitchBox relay contacts
The three relay contacts can be used
▪ as a door opener or
▪ to activate a door gong.
Each contact can be assigned to one or both bell pushbuttons.
The relay contact is connected when a bell pushbutton is pressed. The contact
remains connected as long as the bell pushbutton is pressed.