4
Assembly and connection
12 / 56
DoorLine Slim DECT
4
Assembly and connection
4.1
For your safety
Assembly must only be carried out by specialists with corresponding skills and
experience. These persons must be able to detect dangers and to avoid pos-
sible risks.
The statutory specifications at the place of installation must be observed.
Take care not to jam the connecting cables during installation.
Also observe the safety instructions at the start of the Operating Instructions.
Caution:
The front panel of the device is made of glass. It can be damaged
and cause injury. Protect the glass surfaces against damage.
4.2
Scope of supply
The scope of supply of the device includes:
▪
the device
▪
Assembly and Operating Instructions
▪
mounting plate
▪
sealing flange
▪
bag with fastening material and Allen key
▪
wall power supply
4.3
Prior to assembly
Check all parts for completeness and transport damage prior to assembly.
We recommend that you initially register the DoorLine in the direct vicinity of
your PBX system, try it out and make the basic configuration.
In this manner, you can install the wiring and configure the bell pushbutton
quickly and easily.
After the DoorLine functions perfectly in this test setup with your TC system and
telephones, you can install the DoorLine in its final place of usage.