Telegärtner DoorLine Pro EXCLUSIVE Series, Инструкция по эксплуатации и сборке

Страница: 88 / 112

7
Configuration via a telephone
88 / 112 DoorLine Pro EXCLUSIVE
7.5 Automatic adjustment to the PBX system
To guarantee optimum hands-free talking in all PBX systems, your device can
adjust automatically to the respective system.
The adjustment takes a maximum of 20 seconds. An adjustment tone sounds
during this procedure. During this period, you should not talk into the receiver
because this can interfere with the automatic adjustment.
We recommend that you always carry out this step even if you
made the configuration via the touch display or via the PC software.
1. Enter the configuration mode (see chapter Entry to con-
figuration mode [
} 86])
2. Actuate the hashtag button and star button on the tele-
phone
3. Enter configuration command "00" at the telephone
Wait approx. 20 seconds until the adjustment tone ends
You will hear the acknowledgement tone.
The device is now adjusted to your PBX system
After the adjustment, you can adapt the volume and the microphone sensitiv-
ity as desired.
The microphone sensitivity can be adjusted in stages; the loudspeaker volume
in 32 stages. When the maximum or minimum possible value is reached, you will
hear an acknowledgement tone. Each correct key input is confirmed by a
neutral acknowledgement tone.
The following code numbers are possible:
Code number 2 reduces the microphone sensitivity
Code number 3 increases the microphone sensitivity
Code number 5 reduces the loudspeaker sensitivity
Code number 6 increases the loudspeaker sensitivity