Telegärtner DoorLine Pro EXCLUSIVE Series Скачать руководство пользователя страница 16

Страница: 16 / 112

Assembly and connection

16 / 112

DoorLine Pro EXCLUSIVE

4.4

Place of installation

▪

The device is intended for installation outdoors in an area protected from
splash water (moisture protection as per IP 54, splash water at an angle of
up to 60° to the verticals).

▪

A minimum distance from the microphone to the nearest corner wall sur-
face of at least 10 cm must be observed.

▪

The ambient temperature must be between -20 °C and +60 °C.

▪

In the area of the installation location, no supply lines or similar must be in-
stalled.

4.5

Installing device

The device is completely surface-mounted with the enclosed mounting plate
and fastening material.

4.5.1

Installing mounting plate on the wall

Fig. 2:

1. Position the mounting plate (

) on a standard in-wall socket (

) or a suitable

cavity in the masonry. The recess in the mounting plate must be fitted ac-
curately on the in-wall socket.

Содержание DoorLine Pro EXCLUSIVE Series

















































































































Результаты поиска

Содержание DoorLine Pro EXCLUSIVE Series

Отзывы:

Похожие инструкции для DoorLine Pro EXCLUSIVE Series

Бренды по названию

Популярные бренды

Telegärtner DoorLine Pro EXCLUSIVE Series, Инструкция по эксплуатации и сборке

Результаты поиска

Содержание DoorLine Pro EXCLUSIVE Series

Отзывы:

Похожие инструкции для DoorLine Pro EXCLUSIVE Series

Бренды по названию

Популярные бренды