Telegärtner DoorLine Pro EXCLUSIVE Series, Инструкция по эксплуатации и сборке

Страница: 15 / 112

Assembly and connection
4
DoorLine Pro EXCLUSIVE 15 / 112
4 Assembly and connection
4.1 For your safety
Assembly must only be carried out by specialists with corresponding skills and
experience. These persons must be able to detect dangers and to avoid pos-
sible risks.
The statutory specifications at the place of installation must be observed.
Take care not to jam the connecting cables during installation.
Also observe the safety instructions at the start of the Operating Instructions.
Caution: The front panel of the model DoorLine Pro exclusive color is made of
glass. It can be damaged and cause injury. Protect the glass surfaces against
damage.
4.2 Scope of supply
The scope of supply of the device includes:
▪ the device
▪ wall power supply
▪ mounting plate
▪ bag with fastening material and Allen key
▪ brief instructions
▪ Emergency PIN card (see Emergency PIN [
}
13])
4.3 Prior to assembly
Check all parts for completeness and transport damage prior to assembly.
We recommend that you initially connect the DoorLine in the direct vicinity of
your PBX system, try it out and make the basic configuration.
In this manner, you can install the wiring and configure the bell pushbutton
quickly and easily.
After the DoorLine functions perfectly in this test setup with your PBX system and
telephones, you can install the DoorLine in its final place of usage.