Operation
5
Operation
5
Video/audio system connection
Before you connect any external
devices, make that power of the unit is
switched off.
Following outputs are available in this unit.
Composite video
Use the yellow plug of an AV cable to
connect the composite video output of this unit
to the video input of a TV/display.
SCART
Use a 21-pin SCART cable to connect the
SCART output of this unit to the TV/display
SCART input.
5.1 audio
Use 3 pairs of audio cables to connect the
5.1 CH audio outputs of this unit to the 5.1
channel inputs of external audio amplifiers or
other players.
Stereo audio
Use a pair of AV cables (red for right/white
for left) to connect the stereo audio outputs of
this unit to the TV or a stereo input of power
amplifier.
Coaxial digital audio
Use a special coaxial cable to connect the
coaxial output of this unit to the coaxial input of
a power amplifier.
Optical
Use the special optical cable to connect the
optical audio output of this unit to the optical
input of a power amplifier.
Component video
Use a 3-core AV cable to connect the
component outputs of this unit to the
corresponding inputs of a TV/display.
S-video
Use an S-Video cable to connect the
S-Video output of this unit to the S-Video input
of a TV/display.
• The type of connection depends on
the TV/computer display input terminals. Do
not make all the connections at the same time;
otherwise the produced picture will be affected.
• Settings parameters should be adjusted
according to the type of connection of the
external device.
