General Information
16
General Information
16
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom
Cause
Solution
No sound
Poor audio cable connection
Make proper connection
Disc is dirty or damaged
Clean the disc
MUTE function is on
Disable the MUTE function
No image
Poor video cable connection
Make proper connection
Incorrect setting of your TV set
Correct the settings of your TV set
Disc cannot be
read
Disc is not inserted
Insert the disc
Disc is inserted incorrectly
Insert the disc with the label side facing up
Condensate on the unit laser
head
Switch the unit on without a disc for an
hour
Remote control
does not
operate
Remote control is incorrectly
directed at the unit
Use the remote controller according to the
manual
Distance and angle to the unit
are too large
Decrease the distance and angle
Batteries are exhausted
Replace both batteries
Some functions
do not work
Disc is recorded incorrectly
Wait 5-10 seconds and the unit will
automatically return to normal playback
Incorrect key sequence
Repeat the operation one more time
Static voltage on the unit
housing
Switch the unit off for 1-2 minutes and then
switch it on again
Unstable image
Incorrect TV settings
Correct the TV settings
Accessories
1. DVD player
1 pc
2. Remote controller
1 pc
3. Audio-video cable
1 pc
4. Battery AAA 1.5V
2 pcs
5. Consumer information
1 pc
6. Warranty card
1 pc
7. Instruction manual
1 pc
