PTZ Setting (Network)
Supplementary Guide
PAGE
16
5.
Click
[OK]
to save the setting
6.
Graphical representation of the new schedule will show on the left side
7.
You can select a schedule by clicking on any space of a column to select the day it represents.
The schedules will show in list way on the right hand side.
8.
Click to select a schedule
9.
Click
[Edit]
to edit the detail
10. Click
[Copy]
to copy this schedule to another day
11. Click
[Today]
to show today’s schedules
12. To remove a schedule, click on
[Remove]
button. You can delete the schedule highlighted in
list view on the right hand side, delete today’s schedules or delete all schedules.
4.2. PTZ Setting (Network)
As TeleEye RX
video recording server built with a RS485 IN and OUT port, you can connect port
OUT to Pan/Tilt/Zoom cameras (in parallel) and connect port IN to keyboard controller. The
connection diagram is shown below.
4.2.1. Connection with PTZ Cameras
1.
Connect the P/T/Z cameras to the RS 485 OUT port in parallel at the TeleEye RX rear panel.
Connect the P/T/Z cameras to video input port according to each P/T/Z camera ID.
All P/T/Z cameras should be the same model.
2.
Connect the keyboard controller to the RS 485 IN port at the TeleEye RX rear panel. For
keyboard controller setup, please refer to the keyboard controller manual.
4.2.2. Configure P/T/Z Cameras Driver and Setting
Pan Speed
The horizontal movement speed of the PTZ camera
Tilt Speed
The vertical movement speed of the PTZ camera
Pan Duration
The horizontal movement duration after pressing a
[
←
←
←
←
]
or
[
→
→
→
→
]
button
